Feb
16

Install A Programmable Thermostat

Before starting the installation of your thermostat, it is very important to check all the manufacturer’s instructions. Once you are through with all the instructions, you need to stop the power supply to the furnace and air conditioner. Cut power at breaker box or remove the fuse from service panel.

It is a very crucial step that you can not afford to forget. After this, take out the cover of your old thermostat and also unscrew the old mounting plate from the wall. Make sure you are not disconnecting any wire while doing this.

Before you disconnect any of the wire, you should label it. Many times it is seen that with out labeling, people do wrong connections that can prove to be very costly. Once you have labeled the wires, you can disconnect them from the screw terminals.

When you start installing a new unit, you need to thread the wires through your thermostat base. Its base should be level and sits flush with the wall. The holes can be marked with a pencil. You can drill new holes at new locations as per your requirement. Screw the mounting screws into the wall so that its base can be locked. When you tighten the screw, make sure that base is level.

It is a good idea to first consult the wiring diagram of the thermostat manufacturer’s instructions. Next, mount the thermostat to the mounting plate and proceed with wiring. If necessary, use a wire stripper to remove about 1/4 inch of the plastic sheathing. Connect the wires to the screw terminals, matching the letters on the thermostat to the masking tape labels.

Turn the power back on and begin programming the unit. The manufacturer’s instructions should contain the necessary programming information, as each unit is distinct in its programming process.

After installing your thermostat, you need to do some more settings in order to save money. You need to be cautious while programming your unit. Generally a thermostat comes with four different settings- wake, away, evening, night/sleep.

As per your family’s schedule, you can set time for each of these settings. It will help you in making considerable savings. If you are out of your house during daytime then it is advised to set the temperature little low in winters and little higher in summers.

Scott Rodgers is a writer with great experience in electricians work all over the country. His exemplary guidance has generated for a lot many Hyattsville Electricians Need one? click here!) and Bellevue Electricians (Need one? click here!).

Tags: , , , , , , , , , , , , ,
Jan
03

Why You Need A GFCI Outlet ?

If you’re buying an older house, or making upgrades to your current , you must think of replacing a standard outlet with a GFCI (Ground Fault Circuit Interrupter) outlet. It has an inbuilt circuit breaker that prevents an electrical shock and also put a stop on shorting of related circuit breaker.

Kitchens, bathrooms, laundry rooms, outdoor locations, wet bar locations, unfinished basements, garages and crawl spaces are some places where GFCI outlets are used. In short a prime location for a GFCI outlet is anywhere where water or dampness is an issue.

Fuse plays an important role in preventing a fire in house due to any electrical disorder. However, a GFCI outlet opens its local circuit breaker present inside it and prevents any mishap. One more advantage of a GFCI outlet is that, it prevents the shock in other outlets also that are present in same circuit breaker.

When you work with any electrical device at a place where water flows, chances of electric shock increases as water is a good conductor of electricity. In kitchen and bathroom, installation of GFCI outlet is must. A GFCI outlet will detect an imbalance in current flowing from the hot wire to the neutral and shut off the circuit in that case.

Normally a GFCI outlet has 3 holes in it. Out of these three, one hole present in mid is for ground wire, one with small slit is for neutral wire and one with larger slit is for hot wire. They are very useful for us as they quickly detect any problem and protect us from an accident.

A GFCI constantly monitors the flow of electricity between the two sides. As long as everything is working and stable, there are no problems. But as soon as there is a deviation in the current flow, the GFCI trips out and cuts the flow of electricity.

Installation of a GFCI electrical outlet is not very difficult. You just need to follow some safety precautions before installing a GFCI electrical outlet. Most important is to turn off the circuit you are working on. Secondly, use tools with insulated handles to avoid any shock. After that, follow all the installation steps for properly installing it.

Now, importance of a GFCI outlet must be cleared in your mind. Therefore, replace your standard outlets with GFCI outlets for securing your house. Prefer to do the replacement yourself as a professional electrician will ask for huge money and it’s not so difficult that you can’t do it.

Scott Rodgers is an author with great experience in electricians work all over the country. His exemplary guidance has created opportunities for a lot many Tunnel Hill Electricians (Need one? click here!) and White Electricians (Need one? click here!).

Tags: , , , , , , , , , , , ,
Jan
02

Convenient Ways Of Shifting An Outlet

When you make a new house, you install the electric wiring and outlets according to your need, but after some days or years you may feel the need of a fitting or outlet at some other place where you don’t have it. In that case, you either put a new outlet there or move an unused outlet at that place.

Tools and Materials required for moving are: drywall or keyhole saw, Phillips and flat head screwdrivers, cut-in electrical box, 12×3 electrical wiring, wire nuts, blank electrical plate, drill, 1 inch paddle bit, side cutting pliers and wire strippers.

Before starting the work, the first and mandatory thing to do is to cut off the power. For this turn off the breaker which is connected to the outlet you will be working on. You can use a volt meter or a light to test the outlet and verify that no power is flowing through the outlet.

Next step is to prepare the space where you need to install your new cut-in electrical box. For that, trace the outline by putting the electrical box on the wall and cut it using a keyhole or drywall saw.

The wires that were used in old outlet can be used for new outlet also. Hence, stretch the wires via attic or via basement up to the new outlet location. In case the existing wire falls short for the purpose then you can add a new wire to this existing wire so that it can easily reach at the desired location.

Install your cut-in electrical box at the place prepared for it. Properly tighten the two Phillips head screws, provided at the corner side. After setting up the electrical box, bring out the wires from wire feed to do the connections.

While connecting the wires to the outlet, always keep one thing in mind that you should always connect the black wire to copper or darker (hot) screw and white to silver or lighter (neutral) screw. Always connect the ground wire to green screw. Use screw driver to tighten the screw that attach the outlet to the electrical box and finally cover it with the cover plate.

Screw the blank plate into the old electrical box using the supplied flat head screws and check by switching on the power supply. If the new outlet is working fine, your work is successfully done.

Scott Rodgers is a writer with ample experience in electricians work all across the nation. His exemplary guidance has generated opportunities for a lot many Lake Forest Electricians and Park Ridge Electricians .

categories: ,,,,,,, and Garden, Improvement,Business,,

Tags: , , , , , , , , , , , ,

Powered by Yahoo! Answers