Ningbo Textiles

19 Responses to Machine Embroidery

1. 

   minijayanand

   January 7, 2012 at 6:47 pm

   Mam please send these tips and other tips were easy my email. I have got a usha? janome stitch magic automatic machine. But two needle tool which I have not used. Two needle use to send to my email.
2. 

   MsSlynette

   January 7, 2012 at 7:16 pm

   Thank? you for posting this! It was very helpful!
3. 

   2JobsStillPoorUSA

   January 7, 2012 at 7:51 pm

   despite the sound problems, I think you did quite well in your explanation of this technique. I’ve never had the guts to attempt this and now I have an embroidery machine. But you never know. . . I might some day? Want a more handmade look. Thank you so much for sharing.
4. 

   silverstars39

   January 7, 2012 at 8:36 pm

   Really helpful thanks Amy and lucy kate? crafts! I’ve got a janome and I’ve just ordered a free motion foot, can not wait!!)
5. 

   22222julia

   January 7, 2012 at 8:37 pm

   so you do not lower the tension for? machine embroidery? You just leave it at 4?
6. 

   lucykatecrafts

   January 7, 2012 at 9:07 pm

   @ 22222julia? my machine has a red marker on the upper wheel tension, which is the optimum setting, and its ’4 ‘. hope that helps:)
7. 

   22222julia

   January 7, 2012 at 9:33 pm

   hi lucy, sorry to ask you again, but upper Which? Tension should i use?
8. 

   22222julia

   January 7, 2012 at 10:32 pm

   ok, thank you, then i will not have? to change anything. thank you so much!
9. 

   lucykatecrafts

   January 7, 2012 at 11:08 pm

   @ 22222julia no, i have not. with my previous machine, the bobbin tension was adjusted and the thread got quite accidentally snagged? up underneath.
10. 

    22222julia

    January 7, 2012 at 11:47 pm

    hello lucy thank you for the tutorial. i do? have a bernina, 220 may i ask you, do you ever change the bobbin tension?
11. 

    lucykatecrafts

    January 8, 2012 at 12:05 am

    Apologies again for the sound quality, i do not know where that ‘popping’ sound came from, husband thinks it’s feedback through the mic, as i was filming it myself, and sewing at the same time, i had to hold the camera quite close to the sewing machine. wants to use a tripod next? time! (note to husband – tripod, next birthday present maybe?)
12. 

    EGYPTQUILTS

    January 8, 2012 at 12:10 am

    go to sarahlwhittle video is great. this one is very good. its great for being done? with one hand. princessliss needs more information. thanks kate
13. 

    guitpla304

    January 8, 2012 at 1:10 am

    you need to adjust your bobbin tension. . . there is a little screw on the bobbin case, tight? it a couple of turns
14. 

    princesslisa31

    January 8, 2012 at 1:57 am

    I have a husqvarna, the darning foot and a hop and I still cannot do it. the bottom thread gets all tangled up, I will try pulling the thread through? l; ikme but if you did not thats why it does it, what could it be fantastic vid, thnx:)?
15. 

    brerbear

    January 8, 2012 at 2:53 am

    If you havent figured this out yet if you lower the foot (if thats possiblle on your machine it is on my ColorMatic? 6440) so it almost Sitson the fabric the stitches wont skip.
16. 

    artmakesmesmile

    January 8, 2012 at 2:57 am

    Thanks lucy kate crafts. . . . Your relaxed manner and way you deliver the instructions are great but the sound quality was really poor and I missed some parts where you talk. I got the jist though and I was impressed with your multi-tasking Particularly one hand? other embroidery technique filming lol: o) Thanks!
17. 

    lucykatecrafts

    January 8, 2012 at 3:16 am

    it’s just normal sewing thread, nothing special. You Can Use specialist? threads for machine embroidery but for the demo, i just used my usual sewing threads.
18. 

    sewsonsunday

    January 8, 2012 at 4:07 am

    what sort of thread do you use? The top looks quite thick? and really easy to see
19. 

    beadclub

    January 8, 2012 at 4:38 am

    Very? informative!